Semi-automatic welding machines "TERMITE" series "T»

         The inverter apparatus "TERMITE" for Semi-automatic wire Welding with a series of "T" is created to replace obsolete welding machines transformer type (PDG). The possibility of mechanized welding is not only inert (MIG) or active (MAG) gas, but flux-cored welding no gas (NoGas) with reverse polarity. Implemented an additional function of Heating of the metal carbon electrode (WARM).

         Modern semi-automatic "TERMITE" is 3-4 times lighter than their ancestors and more simple and easy to use. The transition to inverter technology and avoiding inefficient transformers allowed us to increase the efficiency of the semi-automatic "TERMITE" T series up to 85%, and given the opportunity to work from the mains with the voltage from 160V.

         The Assembly quality control at all stages of production and output quality control of welding on a special test bench allows us to assert that the claimed performance of power devices, the current and the working voltage correspond to the real.

         Management microcontroller allows you to programmatically and accurately configure all the parameters and characteristics of welding processes is still under development. The power part and the control circuit are on separate circuit boards. The power control unit is supplied from an independent source and not from a winding on the power transformer, as in 60% welding inverters supplied to Russia. This is an important advantage, because the stability of the power control scheme depends on the reliability of the device, especially when the unstable supply voltage.

         The main advantages of semi-automatic "TERMITE" series T:
- a high level of quality (2 years warranty);
- best price than similar models from other brands;
- easy to setup;
- low power consumption;
- no spattering of metal;
- the stability of the welding;
- the absence of jerks when the wire feed;
- a program "soft start»;
- the program "ahead of the curve and delay gas»;
- adjustment of the inductance - smart setting probablemente (depth of penetration, height and width of the cushion) for thin and thick metal.
- the choice of modes of operation of a button of the burner 2T and 4T;
- mode WARM - the heating of metal carbon electrode;
- output polarity (for cored wire).

         With the help of semi-automatic "TERMITE" you can always execute a high-performance welding with a perfect seam as long length, small length, up to "rivet».

Semi-automatic welding machines "TERMITE" series "T»

         The inverter apparatus "TERMITE" for Semi-automatic wire Welding with a series of "T" is created to replace obsolete welding machines transformer type (PDG). The possibility of mechanized welding is not only inert (MIG) or active (MAG) gas, but flux-cored welding no gas (NoGas) with reverse polarity. Implemented an additional function of Heating of the metal carbon electrode (WARM).

         Modern semi-automatic "TERMITE" is 3-4 times lighter than their ancestors and more simple and easy to use. The transition to inverter technology and avoiding inefficient transformers allowed us to increase the efficiency of the semi-automatic "TERMITE" T series up to 85%, and given the opportunity to work from the mains with the voltage from 160V.

         The Assembly quality control at all stages of production and output quality control of welding on a special test bench allows us to assert that the claimed performance of power devices, the current and the working voltage correspond to the real.

         Management microcontroller allows you to programmatically and accurately configure all the parameters and characteristics of welding processes is still under development. The power part and the control circuit are on separate circuit boards. The power control unit is supplied from an independent source and not from a winding on the power transformer, as in 60% welding inverters supplied to Russia. This is an important advantage, because the stability of the power control scheme depends on the reliability of the device, especially when the unstable supply voltage.

         The main advantages of semi-automatic "TERMITE" series T:
- a high level of quality (2 years warranty);
- best price than similar models from other brands;
- easy to setup;
- low power consumption;
- no spattering of metal;
- the stability of the welding;
- the absence of jerks when the wire feed;
- a program "soft start»;
- the program "ahead of the curve and delay gas»;
- adjustment of the inductance - smart setting probablemente (depth of penetration, height and width of the cushion) for thin and thick metal.
- the choice of modes of operation of a button of the burner 2T and 4T;
- mode WARM - the heating of metal carbon electrode;
- output polarity (for cored wire).

         With the help of semi-automatic "TERMITE" you can always execute a high-performance welding with a perfect seam as long length, small length, up to "rivet».

Semi-automatic welding machines "TERMITE" series "T»

         The inverter apparatus "TERMITE" for Semi-automatic wire Welding with a series of "T" is created to replace obsolete welding machines transformer type (PDG). The possibility of mechanized welding is not only inert (MIG) or active (MAG) gas, but flux-cored welding no gas (NoGas) with reverse polarity. Implemented an additional function of Heating of the metal carbon electrode (WARM).

         Modern semi-automatic "TERMITE" is 3-4 times lighter than their ancestors and more simple and easy to use. The transition to inverter technology and avoiding inefficient transformers allowed us to increase the efficiency of the semi-automatic "TERMITE" T series up to 85%, and given the opportunity to work from the mains with the voltage from 160V.

         The Assembly quality control at all stages of production and output quality control of welding on a special test bench allows us to assert that the claimed performance of power devices, the current and the working voltage correspond to the real.

         Management microcontroller allows you to programmatically and accurately configure all the parameters and characteristics of welding processes is still under development. The power part and the control circuit are on separate circuit boards. The power control unit is supplied from an independent source and not from a winding on the power transformer, as in 60% welding inverters supplied to Russia. This is an important advantage, because the stability of the power control scheme depends on the reliability of the device, especially when the unstable supply voltage.

         The main advantages of semi-automatic "TERMITE" series T:
- a high level of quality (2 years warranty);
- best price than similar models from other brands;
- easy to setup;
- low power consumption;
- no spattering of metal;
- the stability of the welding;
- the absence of jerks when the wire feed;
- a program "soft start»;
- the program "ahead of the curve and delay gas»;
- adjustment of the inductance - smart setting probablemente (depth of penetration, height and width of the cushion) for thin and thick metal.
- the choice of modes of operation of a button of the burner 2T and 4T;
- mode WARM - the heating of metal carbon electrode;
- output polarity (for cored wire).

         With the help of semi-automatic "TERMITE" you can always execute a high-performance welding with a perfect seam as long length, small length, up to "rivet».

Semi-automatic welding machines "TERMITE" series "T»

         The inverter apparatus "TERMITE" for Semi-automatic wire Welding with a series of "T" is created to replace obsolete welding machines transformer type (PDG). The possibility of mechanized welding is not only inert (MIG) or active (MAG) gas, but flux-cored welding no gas (NoGas) with reverse polarity. Implemented an additional function of Heating of the metal carbon electrode (WARM).

         Modern semi-automatic "TERMITE" is 3-4 times lighter than their ancestors and more simple and easy to use. The transition to inverter technology and avoiding inefficient transformers allowed us to increase the efficiency of the semi-automatic "TERMITE" T series up to 85%, and given the opportunity to work from the mains with the voltage from 160V.

         The Assembly quality control at all stages of production and output quality control of welding on a special test bench allows us to assert that the claimed performance of power devices, the current and the working voltage correspond to the real.

         Management microcontroller allows you to programmatically and accurately configure all the parameters and characteristics of welding processes is still under development. The power part and the control circuit are on separate circuit boards. The power control unit is supplied from an independent source and not from a winding on the power transformer, as in 60% welding inverters supplied to Russia. This is an important advantage, because the stability of the power control scheme depends on the reliability of the device, especially when the unstable supply voltage.

         The main advantages of semi-automatic "TERMITE" series T:
- a high level of quality (2 years warranty);
- best price than similar models from other brands;
- easy to setup;
- low power consumption;
- no spattering of metal;
- the stability of the welding;
- the absence of jerks when the wire feed;
- a program "soft start»;
- the program "ahead of the curve and delay gas»;
- adjustment of the inductance - smart setting probablemente (depth of penetration, height and width of the cushion) for thin and thick metal.
- the choice of modes of operation of a button of the burner 2T and 4T;
- mode WARM - the heating of metal carbon electrode;
- output polarity (for cored wire).

         With the help of semi-automatic "TERMITE" you can always execute a high-performance welding with a perfect seam as long length, small length, up to "rivet».

Semi-automatic welding machines "TERMITE" series "T»

         The inverter apparatus "TERMITE" for Semi-automatic wire Welding with a series of "T" is created to replace obsolete welding machines transformer type (PDG). The possibility of mechanized welding is not only inert (MIG) or active (MAG) gas, but flux-cored welding no gas (NoGas) with reverse polarity. Implemented an additional function of Heating of the metal carbon electrode (WARM).

         Modern semi-automatic "TERMITE" is 3-4 times lighter than their ancestors and more simple and easy to use. The transition to inverter technology and avoiding inefficient transformers allowed us to increase the efficiency of the semi-automatic "TERMITE" T series up to 85%, and given the opportunity to work from the mains with the voltage from 160V.

         The Assembly quality control at all stages of production and output quality control of welding on a special test bench allows us to assert that the claimed performance of power devices, the current and the working voltage correspond to the real.

         Management microcontroller allows you to programmatically and accurately configure all the parameters and characteristics of welding processes is still under development. The power part and the control circuit are on separate circuit boards. The power control unit is supplied from an independent source and not from a winding on the power transformer, as in 60% welding inverters supplied to Russia. This is an important advantage, because the stability of the power control scheme depends on the reliability of the device, especially when the unstable supply voltage.

         The main advantages of semi-automatic "TERMITE" series T:
- a high level of quality (2 years warranty);
- best price than similar models from other brands;
- easy to setup;
- low power consumption;
- no spattering of metal;
- the stability of the welding;
- the absence of jerks when the wire feed;
- a program "soft start»;
- the program "ahead of the curve and delay gas»;
- adjustment of the inductance - smart setting probablemente (depth of penetration, height and width of the cushion) for thin and thick metal.
- the choice of modes of operation of a button of the burner 2T and 4T;
- mode WARM - the heating of metal carbon electrode;
- output polarity (for cored wire).

         With the help of semi-automatic "TERMITE" you can always execute a high-performance welding with a perfect seam as long length, small length, up to "rivet».

Semi-automatic welding machines "TERMITE" series "T»

         The inverter apparatus "TERMITE" for Semi-automatic wire Welding with a series of "T" is created to replace obsolete welding machines transformer type (PDG). The possibility of mechanized welding is not only inert (MIG) or active (MAG) gas, but flux-cored welding no gas (NoGas) with reverse polarity. Implemented an additional function of Heating of the metal carbon electrode (WARM).

         Modern semi-automatic "TERMITE" is 3-4 times lighter than their ancestors and more simple and easy to use. The transition to inverter technology and avoiding inefficient transformers allowed us to increase the efficiency of the semi-automatic "TERMITE" T series up to 85%, and given the opportunity to work from the mains with the voltage from 160V.

         The Assembly quality control at all stages of production and output quality control of welding on a special test bench allows us to assert that the claimed performance of power devices, the current and the working voltage correspond to the real.

         Management microcontroller allows you to programmatically and accurately configure all the parameters and characteristics of welding processes is still under development. The power part and the control circuit are on separate circuit boards. The power control unit is supplied from an independent source and not from a winding on the power transformer, as in 60% welding inverters supplied to Russia. This is an important advantage, because the stability of the power control scheme depends on the reliability of the device, especially when the unstable supply voltage.

         The main advantages of semi-automatic "TERMITE" series T:
- a high level of quality (2 years warranty);
- best price than similar models from other brands;
- easy to setup;
- low power consumption;
- no spattering of metal;
- the stability of the welding;
- the absence of jerks when the wire feed;
- a program "soft start»;
- the program "ahead of the curve and delay gas»;
- adjustment of the inductance - smart setting probablemente (depth of penetration, height and width of the cushion) for thin and thick metal.
- the choice of modes of operation of a button of the burner 2T and 4T;
- mode WARM - the heating of metal carbon electrode;
- output polarity (for cored wire).

         With the help of semi-automatic "TERMITE" you can always execute a high-performance welding with a perfect seam as long length, small length, up to "rivet».